Mach Rack Conveyor Dishwasher Corner Bundle with Prewash Sink & Roller Tabling

Our best-selling rack conveyor dishwasher, pre-configured in an easy to install bundle with prewash sink and corner sited exit roller table. A perfect upgrade for your washroom and ideal for busy restaurants, medium size hotels and food production facilities looking to wash between 50-80 baskets per hour.

This bundle package includes everything you need to get up and running. The setup runs from left to right, with a large pre-wash sink set down area and corner sited roller tables for storage of cleaned baskets. Everything is fully welded and finished in a high-quality 304 stainless steel. It even includes a top-of-the-range automatic water softener, so you don’t need to worry about limescale.

We buy directly from this Italian manufacturer, cutting out the middleman so we can offer you this fantastic package deal at an incredibly low trade price. Our UK based service team are available to support you through installation & commissioning and provide complete after sales care, so you can buy online with confidence.

Key Features:

• Washes between 55-80 racks per hour
• Left to right operation with two working speeds
• 110cm washing tunnel with wash & rinse stage
• Automatic detergent & rinse aid dispensers
• Temperature display for wash and rinse stages
• Full AISI 304 stainless steel construction, including all internal components
• Large capacity gravity waste sluice drain
• Made in Italy to the highest quality standards
• UK based after sales care and warranty support

Package Deal Includes:

• 110cm Rack conveyor dishwasher with wash & rinse stages (MST110DX)
• 120cm stainless steel prewash sink with undershelf (TEV/912SX)
• Monobloc Pre Rinse Spray Arm (SPCE984)
• 120cm motorised corner outlet roller table with electronic controller (AUMD/12)
• Automatic water softener (MJMB65)
• Automatic detergent & rinse aid dispenser system (KIT/CDBD)
• Cold fill water connection upgrade (MSTCFO)
• Detergent & rinse aid chemical starter pack

Installation Requirements:

• Layout when fully assembled requires approximately 310cm(wide) x 130cm (deep)
• Measurements are estimated floor plan only. Site survey required
• Requires hard wiring to 3 phase electrical supply by electrician
• Cold mains water connection (minimum 1.5 bar pressure)
• Full assembly, installation & commissioning service available on request

Italian Build Quality, UK Service Excellence

Designed and built in Italy, using only the best European components. Full stainless steel construction, including stainless steel internal components such as filters, boilers, elements, wash arms, jets, plugs and filters and finished in a double-skinned and insulated AISI 304 stainless steel cabinet. A promise of quality that is backed by an extensive UK service network with quick callout and all spare parts in UK stock.

Easy to Use & Maintain

Operation is entirely automatic with electronic sensing of loads, automatic dosing of chemicals and digitally controlled wash and rinse temperatures. Full width stainless steel filters protect internal components from & blockages and the conveyor system can easily be removed for cleaning. The entire washing process is accessible through a full-width counterbalanced door and innovative features such as the front-placed lever waste drain help to avoid unnecessary service calls.

Intelligent Energy Saving

MST conveyor dishwashers automatically detect the presence of baskets to start washing, rinsing, and drying equipment on demand. With 2 working speeds, the dishwasher can easily adapt to your load requirements to save energy. Optional advanced energy saving features, including steam capture and condenser heat pump units, can save up to 30% energy when compared to equivalent systems.

Example Layout & Configuration

1	Large stainless steel sink with monobloc spray arm for set down and pre-washing.
2	Conveyor system detects basket and automatically starts washing process.
3	High power wash stage fully cleans plates and utensils.
4	High temperature rinse stage ensures thermal disinfection & sanitisation.
5	Machine senses cycle is complete, replenishes detergents & pauses for next basket.
6	Rack conveyor pushes washed basket onto the roller table for unloading.